Contact us: 0121 543 2950

View Cart View Cart

Change site

IRL UK INTL
Uni-Roof Temporary Roofing

Uni-Roof Temporary Roofing

Components

View all
450mm Alloy Ridge Beam

450mm Alloy Ridge Beam

1 size available

450mm Alloy Ridge Beam added to quote

View
D780mm Alloy Ridge Beam

D780mm Alloy Ridge Beam

2 sizes available

D780mm Alloy Ridge Beam added to quote

View
Uni-Frame

Uni-Frame

3 sizes available

Uni-Frame added to quote

View
450mm Alloy Ridge Beam

Quick Add

450mm Alloy Ridge Beam

Select the variant you wish to add then change the value and click add to quote:

D780mm Alloy Ridge Beam

Quick Add

D780mm Alloy Ridge Beam

Select the variant you wish to add then change the value and click add to quote:

Uni-Frame

Quick Add

Uni-Frame

Select the variant you wish to add then change the value and click add to quote:

A bit about Uni-Roof

Altrad Generation hire & sale offers the Uni-Roof temporary roofing system, this aluminium system is based around the use of the 0.45m, 0.78m and 1.33m alloy lattice beams. Standard bay sizes are available at 2.072mtr / 2.572mtr / 3.072mtr widths with other bay width options available upon request for specialised applications. With spans of up to 50m along with Mono pitch, Duo pitch 18-degree and 36-degree roofing types available the Uni-Roof system is the ideal choice and has proven itself with over 25 years of continual use in the industrial/commercial/historic and domestic markets.

Hand, crane and roll-out methods of erection are catered for with multiple options available to meet most site requirements reducing the need to work at height as well as speeding up the build and dismantle times. This Keder-based system utilises an alloy sheet tracking profile, which allows for the sheeting to be pulled through the tracking to enclose each bay. Standard sheet tracking meets the demands of most temporary roofs supplied and has up until now been the only option available without great expense.

With large-scale roofing projects comes the problem of greater rainwater run-off, this water must be managed to avoid ingress and possible damage to what is being protected. Prestigious roofing projects can often demand greater protection from the elements, again rainwater run-off must be managed to maximise the benefits of the temporary roof cover.

Deep Flow sheet tracking is a heavy-duty aluminium profile with an integrated gutter system which allows for the installation of sheeting to temporary roofs or sidewall cladding elements.

  • Integrated joining method – fewer parts on-site, eliminating manual assembly.

  • Efficient rainwater channelling using integrated sealed spigot.

  • Fully compatible with existing Uni-Roof / Ubix systems.

  • Strong aluminium profile enabling 2mtr – 2.4mtr bracing intervals.

  • Removable spigot to enable staggered bays if required.

  • Increased weatherproofing.

  • Reduced Mono pitch roof angle down to 9 degrees.

*Deep Flow tracking system is not a standard Uni-roof component and is available for hire & sale, please contact your local Altrad Generation branch for costings*

Contact our specialists

Area Covered: Birmingham North

Area Covered: Birmingham West

Area Covered: Bournemouth

Dominic Sheppard

01202 591255

[email protected]

Area Covered: Brigg

Area Covered: Bristol East

Area Covered: Cardiff

Area Covered: Cardiff Docks

Area Covered: Chelmsford

Area Covered: Chichester

Area Covered: Croydon

Jason Varkevisser

0208 6896044

[email protected]

Area Covered: Dundee

Area Covered: Edinburgh East

Laurence McTernan

0131 552 7534

[email protected]

Area Covered: Edinburgh West

Area Covered: Glasgow East

Area Covered: Glasgow South

Area Covered: Grays

Area Covered: Kings Lynn

Area Covered: Leeds South East

Area Covered: Light Access

Area Covered: London East / South Ockendon

Area Covered: London West

Area Covered: Luton

Area Covered: Manchester

Area Covered: Newcastle

Kevin Philliskirk

0191 492 1190

[email protected]

Area Covered: Northampton

Area Covered: Norwich

Area Covered: Nottingham

Area Covered: Peterborough

Area Covered: Reading

Area Covered: Rotherham

Area Covered: Truro

Area Covered: Widnes

Uni-Roof Roll Out Tracking Options

Uni-Roof Roll Out Tracking Options

The roll-out method for the Generation Uni roof eliminates the need to work at height along with speeding up the installation process.

Multiple options are available to satisfy the demands and complexities of virtually any project.

The rolling systems are capable of being used with temporary roofs or scaffold structures to allow for access beneath the covered working area.

Trax Tube Bracket System

Steel casting enables standard scaffold tubes to be joined to form an effective track for the rolling of roof/scaffold structures. This system does not have anti-uplift capability.

Trax Uni Beam System

Steel beams with integrated scaffold tubes are to be joined to form an effective track for the rolling of roof/scaffold structures. This system has full anti-uplift capability.

Eliminates work at height

Speeds up erection/dismantle times

Allows for material installation or removal

Anti-Uplift and Non-Anti-Uplift options available

Multiple tracking to beam-line connection options

Compatible with traditional Tube & fitting/system scaffolding

Our use of cookies

Some cookies are necessary for us to manage how our website behaves while other optional, or non-necessary, cookies help us to analyse website usage. You can Accept All or Reject All optional cookies or control individual cookie types below.

You can read more in our Cookie Notice

Functional

These cookies enable core functionality such as security, network management, and accessibility. You may disable these by changing your browser settings, but this may affect how the website functions.

Analytics cookies

Analytical cookies help us to improve our website by collecting and reporting information on its usage.

Site Choice
Please select preferred site